My front wheel bearings just went in my 04 mountaineer, and we tried to replace them ourselves, but in order to get to the bearings you have to have the truck up on a lift, so unfortunately we had to send it to a mechanic.
The motor of the seats either is broken, or the car is just getting old.
to change the wheel and tire on a car just loosen the bolts on the wheel jack it up and replace it
Just peel out and see which tires spin! I'll save you the wear on your tires, it's front wheel drive.
Just a coincidence, either it needs brake fluid or a wheel speed sensor has gone bad.
Sure, just don't shift it into 4 wheel drive...
i just fixed mine today. there was a spring that had broke and it was causing the locking action too bind up. i replaced the spring and now it works just fine
You can find at the very end of the plastic panel just under the steering wheel.
You can it 7x17" alloy wheels on a 1999 Vauxhall Corsa. Just make sure they do not rub on the wheel arches. If you want to be 100% sure about it, then go for 7x16" alloy wheels.
There was a recall for the cruise control causing smoking and sometimes burning have you checked to have it replaced? We just had ours replaced we received letter stating the recall. Hope this helps...
Its the blend door. It happened on my 98 Mercury Mountaineer. The motor shaft and the door have separated there is an easy fix look up blend door fix for 98 Mercury Mountaineer it just needs a small finishing nail and done
Eobd plug is located behind the cowling just below the steering wheel