To connect the defrost cable in an MR2 hardtop, first, locate the defrost switch and the cable's connection point at the rear window. Ensure the cable is properly routed without any twists or obstructions. Then, securely attach the cable to the defrost switch and the rear window connector, ensuring it is tightened adequately. Finally, test the defrost functionality to confirm the connection is successful.
You have a hydraulic clutch in your mr2, no cable.
The weight of a hardtop Toyota MR2, particularly the second-generation model (AW11), is approximately 2,400 pounds (about 1,088 kg). This can vary slightly depending on specific configurations and options. The lightweight design contributes to its agile handling and performance characteristics.
To replace the speedometer cable on a 1991 Toyota MR2, first, disconnect the negative battery terminal and remove the instrument cluster by unscrewing the necessary screws and gently pulling it out. Locate the speedometer cable at the back of the cluster and unscrew it from the speedometer. Next, trace the cable to the transmission, disconnect it there, and replace it with a new cable by reversing the removal steps. Finally, reassemble the instrument cluster and reconnect the battery.
Sounds like the speedo cable may have snapped www.mr2-ben.co.uk Toyota mr2 mk2 New & Used parts
In the hood behind the spare tire.
To replace the engine hood release cable on a 2001 Toyota MR2 Spider, first, open the hood and remove the latch assembly by unscrewing the bolts that secure it. Then, detach the old cable from the latch and pull it out through the firewall, taking note of how it’s routed. Install the new cable by threading it through the same path and connecting it to the latch assembly. Finally, reattach the latch and test the new cable to ensure it operates smoothly.
If an electric window on a Toyota MR2 goes down, but will not go back up, it has probably slipped off the track. There is a cable mechanism that operates the window. The door panel will have to be removed to repair the cable, or put in a new track.
On a 1992 Toyota MR2, the speed sensor is typically located on the transmission. Specifically, it can be found on the driver's side of the transaxle, near the speedometer cable connection. To access it, you may need to remove some components or the cable itself for better visibility. Always consult the vehicle's service manual for precise instructions and safety precautions.
To fix a Toyota MR2 2000 hood latch release cable, first, check for any visible damage or fraying along the cable. If it's stuck or not functioning, you may need to access the latch mechanism, which typically involves removing the interior panel near the driver's side. Once exposed, you can either lubricate the latch or replace the cable if it's broken. Reinstall everything securely and test the release mechanism to ensure it's working properly.
Well, first you need to answer the following before I can provide an answer! 1) What country do you live? 2) What generation of MR2 are you looking for? (1985-89, 1991-99, 2000-05) 3) Are you looking for a supercharged/turbocharged edition? 4) What type of mileage? 5) What options? (ie., power options, sunroof/t-roof/hardtop, leather/cloth) 6) Do you want a stock car or modified with performance upgrades?
Find all your MR2 MK1 answers on the best MR2 forum. Go to : www.mr2oc.com MR2 owners club. See you there!!
how to fix speedometer for Toyota mr2