In a series circuit, the same amount current flows through each light. And each bulb has a fraction of the total voltage. If you remove one light, the current stops flowing. The makes all of the lights be dark. This type circuit is not used in your house, because every light is designed to operate at 110 volt. In parallel circuit, the voltage is the same for each light. The total current is split between the branches of the parallel circuit. I suggest that you use your computer to search for images of series and parallel circuits. As you look at the drawings, you will see the difference between these two types of circuits.
Parallel. One light burning out does not stop all current flow to the other lights.
In a parallel circuit, there are multiple paths for electricity to flow. So, if one switch is turned off there is still other paths for electricity to flow so the other lights can remain on. However, in a series circuit there is only one path for the electricity to travel. So, if the switch in a series circuit was turned off the electricity would stop flowing causing all the lights to go out.
In a series circuit the lights share the voltage between them equally and the current stays the same throughout and if one bulb fuses the the other will not work. For the parallel, the voltage is the full voltage from the battery in all bulbs and the current is split between the different routes, and if one goes out the other one will stay lighten.
Tree lights have parallel circuits because the rest of the lights will remain on if one goes out. Imagine trying to find the one bad bulb on a string of lights if one were to go out. This way, only one light goes out, so it can easily be found and replaced. Hope this helps!
1. You may not want all lights on, so with a parallel circuit you can turn some off while the others remain lit (you cannot do this with series) 2. If one of the lights go out, the others will remain lit
No, electric lights come in both parallel and series circuit.
series circuit
My dad created a parallel circuit when he plugged in the Christmas lights.
Parallel. One light burning out does not stop all current flow to the other lights.
Christmas tree lights, this parallel circuit prevents one bulb failure from turning off the whole string of lights.
Yes you would use a serial circuit You would use parallel circuit lights for a Christmas tree because if you used series circuit lights, and one of the bulb blows, the rest of the bulbs will go out. But with parallel circuit lights, if one bulb blows the rest of the bulbs will remain their brightness.
A parallel circuit lights up even when one bulb is out.
To design a circuit so that lights can be turned on and off separately, we connect the circuit in parallel.
A parallel circuit. All the lights are connected in parallel across the power source.
Generally in a parallel circuit
both
Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.