0
What else can I help you with?
How would you separate a mixture of sand sawdust iron filings and sugar?
To separate this mixture, you could first use a magnet to separate the iron filings. Then, you could add water to dissolve the sugar, leaving the sand and sawdust behind. The sawdust can be separated from the sand by filtration.
What method could you use to separate a mixture of iron fillings into sand?
One method to separate iron fillings from sand is by using a magnet. The iron fillings are attracted to the magnet and can be easily separated from the sand.
What could be used to separate nails from saw dust?
A magnet can be used to separate nails from sawdust easily as nails are ferromagnetic and will be attracted to the magnet, while sawdust will not be affected. Alternatively, using a sieve with small enough holes can also help separate the nails from the sawdust by sifting the mixture.
How could separate the mixture of salt water and saw dust?
Add the mixture of sawdust, sand and salt to water. The sawdust will float and can be skimmed form the surface. The salt will dissolve in the water. The sand can be filtered from the mixture which remains. The salt water solution which remains can be heated and the water will evaporate leaving the salt behind.
How could you separate a mixture of iron fillings and sulfur powder?
One method is to use a magnet to separate the iron fillings from the sulfur powder, as iron is magnetic but sulfur is not. Another method is to mix the mixture with a solvent that dissolves the sulfur powder, leaving the iron fillings behind. Lastly, heating the mixture can also cause the sulfur to sublimate, leaving the iron fillings behind.
How would you separate a mixture of sand sawdust iron filings and sugar?
To separate this mixture, you could first use a magnet to separate the iron filings. Then, you could add water to dissolve the sugar, leaving the sand and sawdust behind. The sawdust can be separated from the sand by filtration.
What method could you use to separate a mixture of iron fillings into sand?
One method to separate iron fillings from sand is by using a magnet. The iron fillings are attracted to the magnet and can be easily separated from the sand.
How could you separate aluminum fillings from iron fillings?
Very easily, put a magnet on them it will attract the iron but not the aluminium.
How could you separate iron fillings from sand?
With a magnet : only iron will be attracted.
What could be used to separate nails from saw dust?
A magnet can be used to separate nails from sawdust easily as nails are ferromagnetic and will be attracted to the magnet, while sawdust will not be affected. Alternatively, using a sieve with small enough holes can also help separate the nails from the sawdust by sifting the mixture.
What are the two method that can be use to separate a mixture of iodine crystal and iron fillings?
Since lead iodide is insoluble in an aqueous solution, you could filter it out using a funnel and filter paper.
How could separate the mixture of salt water and saw dust?
Add the mixture of sawdust, sand and salt to water. The sawdust will float and can be skimmed form the surface. The salt will dissolve in the water. The sand can be filtered from the mixture which remains. The salt water solution which remains can be heated and the water will evaporate leaving the salt behind.
How could you separate a mixture of iron fillings and sulfur powder?
One method is to use a magnet to separate the iron fillings from the sulfur powder, as iron is magnetic but sulfur is not. Another method is to mix the mixture with a solvent that dissolves the sulfur powder, leaving the iron fillings behind. Lastly, heating the mixture can also cause the sulfur to sublimate, leaving the iron fillings behind.
How can you separate solution?
please state what kind of solution you wanna separate, is it solid, liquid or gas?you could separate solutions by this methods:pickingfreezing or chillingevaporationdistillaionfiltrationdecantationand etc.(note:thre are many more methods to sperate a solution)
Could you Devise the experiment that will allow you to separate mixture of copper fillings and salt?
1 take the mixture of salt and sand and immerse them in water. 2 run the water and sand through a filter that separates out the sand. 3 store the sand. 4 boil the water until it has all evaporated or just wait for it to evaporate naturally. This will leave a residue on the bottom of the container which Will be the salt
How do you separate sand salt and sawdust into pure states?
If all three are mixed together you can separate the sawdust from the group with a Sieve filter with holes smaller than the sawdust, but larger than the sand/salt particles. You could then use another sieve, if the sand and salt particles are significantly different in size,...OR add water to the mix....the salt will dissolve into solution leaving the sand behind. Pour off the water and let it evaporate, leaving the salt behind. Put the mixture of sand, salt and sawdust into a quantity of water: the sand will sink to the bottom, sawdust will float and salt will dissolve. Skim off (and dry) the floating sawdust. Pour off the water containing the dissolved salt. This is then heated to cause all the water to evaporate (leaving behind the salt). The remaining residue in the original container (wet sand) can now be dried off with heat.
What is the separation technique that you need to use to separate steel fillings from sulfur?
You can use a magnet to separate steel fillings from sulfur because steel is magnetic whereas sulfur is not. By passing a magnet over the mixture, the steel fillings will be attracted to the magnet and can be easily separated from the sulfur.
