they used stuff to make them work. :D
The daytime running lights work of the high beam, check those first.
My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.
In those tail lights there is a circuit board. If it goes bad it will cause all kinds of problems.
one probably burned the bulb. those always go out.
Yes. When you turn on the lights there is a circuit for the headlights, one for the dashboard lights and a third for the clearance and taillights. Any one of those circuits can fail independantly of the others.
Yes check all of those, if not any of those you might have a broken wire.
I would check the wires just behind the light. I had the same problem and the wires were broken a little just wiggle them as the lights are on.
I would check the wires just behind the light. I had the same problem and the wires were broken a little just wiggle them as the lights are on.
98 sierra1500 4x4 all lights work excepttail lights fuses are good bulbs are new
94 mercury grand marque dashboard, hazard, and tail lights do not work?
Either the bulbs are out, there is a grounding issue in the tail lights, or the headlight switch needs to be replaced. Do the side markers work? If no then it's probably the switch. If yes, then start checking for a bad ground wire on those tail lights.
The tail lights and the stop lights work off of different circuits. The stop lights work when the brake pedal is depressed while the tail lights work when the light switch is turned on. Look for a burnt fuse or a bad connection.