answersLogoWhite

0

My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

What would be the problem if when pressed the brake brake pedal clicks?

nothing it could just be the tail lights coming on.


When foot brake is pressed which light must come on?

The brake lights.


Why do brake lights on your 1978 Ford Fairmont come on when brake is pressed lightly but when pressed harder lights go out?

Probably a faulty brake light switch or the brake light switch is installed incorrectly.


Dash lights comes on when brake is pressed and third brake light comes on with park lights?

wrong bulbs or bad earth


When the foot break is pressed which light must come on?

The rear brake lights.


Why do tail lights stay on after replacing brake booster on a 03 Chrysler Sebring?

It is probably the brake lights that are on due to a misinstalled or damaged brake light switch.


Where is the Brake light switch Nissan pintara 1988?

There is no switch to activate or deactivate the brake lights on a 1988 Nissan. The brake lights automatically turn on any time the brakes are pressed.


Where is the wiring harness for 1989 Chrysler Lebaron brake lights?

It plugs into the taillight.


What is the problem if all running lights and tail lights work but the brake lights don't on a 2000 F-250?

check the fuse, brake lights have their own, & check the brake switch at the top of the brake pedal


What is causing the brake lights not to work unless the brakes are fully pressed on 1989 cougar?

adgust the brake light switch at the brake pedel under the dash


Where is a brake light switch on a Nissan?

The brake light switch on a Nissan is located just behind the brake pedal. It sends a signal to the brake lights when the pedal is pressed to turn them on.


What fuse to look for in 2006 Chrysler 300 touring if gear is stuck?

The most common cause of the shifter to be stuck in park is a broken spring retainer in the shifter assembly. The only fuse that could cause that would be the brake lights fuse. If you have brake lights, it is not a fuse problem.