Accelerate real hard and don't stop You can siphon the fuel out. Sometimes it is necessary to remove the filler neck hose from the tank in order to insert a siphon hose.
Install an inline canister at the bend and the siphon can draw water through it to an elevation above the water source. Stop the siphon flow with a shutoff valve and empty a small amount of the water from the canister and then close it back airtight. When the siphon flow valve is opened the weight of the water in the long leg of the siphon can draw the air out and once the line is purged, the canister is ready to be emptied again. AUTOSIPHON (R) company has designed one valve which can do this.
If your engine is a sportjet, it probably has a bilge siphon system that connects to the pump. If so, the siphon hose must be "looped" from the pump above the water line, then back down to the bilge. This should prevent water from backwashing through the hose into the bilge.
Often the problem is that the anti-siphon valve's cover is simply loose and needs to be tightened. If that doesn't stop the leaking, then remove the cover and replace the gaskets on the cover itself and on the anti-siphon float. Both gaskets can be found at any well-stocked hardware store.
You can not. There is an anti-siphon valve in the filler neck.You can not. There is an anti-siphon valve in the filler neck.
There is an anti-siphon valve in the filler neck. You can not siphon.
When air is removed from the siphon by the pipette, the atmospheric pressure pushes the liquid into the siphon to fill the vacuum created. This creates a pressure difference between the two ends of the siphon, causing the liquid to flow into it.
you cant
The siphon is not your normal drinking glass.
You can't. There is an anti-siphon ball in the filler neck.You can't. There is an anti-siphon ball in the filler neck.
No, you cannot siphon water uphill because gravity pulls the water downward, making it impossible for the siphon to work against gravity.
the inhalent and the exhalent siphons