White goes to the silver screw, black goes to the gold screw, and green is the third prong.
Answer
Be very carefull with this answer, it really depends on where you live in the world, as the colours change from one country to another e.g the above does not apply to the UK.
You can plug an extension cord into another extension cord. A extension cord is to help make doing something easier.
There are several parts to an extension cord. There is the "female" end where you would plug in the appliance, the cord, and then the "male" end which gets plugged into an outlet.
I don't know about an extension cord, but they do sell plug adabters. You can pick them up at any hardware store or even Wal-Mart. They are ussaully grey or orange , and look like the plug end of the extension cord. One end will have the 2 prong, the other side will have the slots to plug in the three prong.
A normal extension cord has a plug on it that is the same as any other plug.
You have to get an extension cord and plug them into it and then plug the extension cord somewhere in your house, if you do not have some type of outdoor outlet. You might try to get the extension cord through a window and then close the window as much as possible.
Are you saying that you plug in a lamp and another lamp on that extension cord goes dimmer? If so then the extension cord wire is of a smll guage size and causing a voltage drop from the outlet to the cord output.
Yes, you can put the iPod Touch wall charger into an extension cord. That extension cord has to be plugged into a wall to be able to charge the iPod, though.
There is a plug like an extension cord, usually behind or below the passenger headlight sometimes even down to the bumper somewhere, sometimes they are hard to find, but pull it out where it is easy to reach an plug it into an extension cord.
The procedure in making an extension cord involves wiring an electrical plug on one end of an electrical cable and wiring a socket onto the other end. Some extension cords have a polarized plug and a ground terminal.
The procedure in making an extension cord involves wiring an electrical plug on one end of an electrical cable and wiring a socket onto the other end. Some extension cords have a polarized plug and a ground terminal.
No, the 220 v and 110 v systems are designed to use a different pin layout for the plugs and sockets, to avoid possibly dangerous cross-connections. The two voltages can not be mixed and equipment for one system cannot be used on the other without a transformer.
Your engine block heater cord plug is plugged into an extension cord, then into your garage or home outlet. Not into the engine.