On the top of your engine is what looks like a cover (coil cover) with 6 10mm bolt heads. Across the back is your air intake coming from your air filter. Remove this and temperature sender, located on drivers side, where air intake is attached to engine, and it will expose the coil cover of your engine compartment. Remove the 6 bolts. Remove this cover, exposing your spark plugs and coils. There is one coil for 2/ea spark plugs. Going on line, you should be able to shop around and buy the coils and plug wires for at least 50% less than at automotive stores or MB. Be careful on removal and installation that you don't break the plugs. I suggest if this is your first time, have the new plugs, wires and coils at hand before starting and as you remove a set, replace them immediately so you won't forget how you took them out. A cool car would be suggested starting this procedure, as it will be very hot in that location. Installation is reverse of removal of course. I hope this was helpful.
easy.........take the old spark plugs out and put the new spark plugs back
To change spark plugs on a 1994 Toyota Camry, remove the black shafts. The spark plugs are down the four holes. Use a socket set with extension to reach the spark plugs. Replace old spark plugs with new ones.
i change the spark plugs on my car but they keep popping out
"Where are the spark plugs on a 1994 Camero?"
From underneath
How can I change the wiring and spark plugs on my 1996 Cadillac Sedan Deville Concours?
Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the spark plug cables and covers, and connect the car battery.
Disconnect the battery, remove the spark plug wires and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the covers and spark plug wires and reconnect the battery.
you have to change the plugs from underneither the van. it takes a lot of fishing around but gets easieer over time.
You will need to remove the engine shroud from inside the cabin to access the engine and plugs.
Need to know what size engine.
Remove 6 long hexnut screws from cover next to oilfill cap. Remove cover.