Want this question answered?
The belt is a M74747 which is 1/2" x 105"
John Deere 210 38" mower deck drive belt: M40223 secondary drive belt
You cannot replace a Jdlt120 with a hydro drive out of a JD lx288 because they are not compatible.
I need this too if anyone has the info I would appreciate it. Thanks!
its a diamo retro.
8
Changing a JD STX38 transmission drive belt.Today I undertook removing my almost failed transmission drive belt on a John Deere STX38. In order to do so (it had come off both the engine pulley and the transmission pulley but was not broken), I had to unbolt the brake pedal lock pin, and disconnect the front wheel steering bars (cotter pin and washer holding each bar to the front wheel axels). The belt then could be removed as the steering arms pass under the belt when it is in place, and the bars are attached by cotter pin and washer, one set at the wheels, and another set at the steering arms in the middle of the chassis. There is one idler pulley in a v shape and another idler pulley that is flattened between the transmission and the steering arms. The back of the belt pushes against the flattened pulley, and the inside (v side) of the belt passes the v shaped pulley as these 2 pulleys provide belt tension.
How is the belt position on the front 48" deck on a JD F525
Jd Dillard goes by JD.
JD Souther goes by JD.
Yes, it is a juris doctor degree (JD).Yes, it is a juris doctor degree (JD).Yes, it is a juris doctor degree (JD).Yes, it is a juris doctor degree (JD).Yes, it is a juris doctor degree (JD).Yes, it is a juris doctor degree (JD).
The John Deere 170 garden tractor was produced in 1989 and 1990. It had a gear drive while the 175 was equipped with a hydro drive.