Laminate flooring has become very popular since its introduction in the United States in 1982. Easy to clean and take care of, laminate floors are becoming a favorite of home owners. Laminate flooring is easier to clean than carpet, it comes in many different designs, and you can install it yourself.
The first thing you have to do is get rid of any other flooring. If you have carpet where you want to install laminate flooring, you need to be sure to pull up carpet, pad, any carpet tacks, and any other debris that has collected there. Make sure the floor beneath is level, and if not, level it out. Vacuum the area very well.
Next, you need to remove baseboards. If you are very careful when you remove the baseboards, you can reuse them after the floor is installed. If they are not in good enough condition to use, you will need to purchase and install new ones. The bottoms of the door jambs will need to be trimmed with a coping saw so that there will be room underneath to fit the flooring and pad. Measure the height of pad and flooring together so that you know how much to trim. Once all that is done, you are ready to lay the underlayment pad. The separate pieces of the pad can be held together with clear plastic tape.
Now, you are ready to install the flooring. Most laminate flooring comes in pieces that easily snap together. You will need to trim the snapping connectors on the pieces that are next to walls. You need to leave enough width between the flooring and the walls so that you can reinstall your baseboards. Start in a corner and put spacers between the wall and flooring to make sure the flooring does not slide up against the wall. Then you can start laying your flooring. As you go along, you may want to use a rubber mallet and a pull bar to smooth the flooring out. Once all the flooring is laid, reinstall your baseboards.
Installing laminate flooring yourself is a fairly simple process, and you will have the satisfaction of knowing you completed a home project yourself.
Yes.
carpenter crayon
One of the proven methods to brighten laminated wood floors is to taka a damp rag, add white vinegar and rub it on the floor.
Needs more information re. "built up "
Depends on level of hardness and polish.
It wont accept wax.. sorry
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
You should install the tile floor first. Install tiles on the entire floor, even under where the vanity will go.
Tear up floor. Install new floor......
Sorry cant think of anything that can be topically applied to Laminate that will make it dance...
No, you should not.
It depends of the floor. You can steam cleaning laminated floors. Check here <a href="http://www.chelseacleaners.co.UK/"> Chelsea cleaners </a>