0
Installing a toilet is not an easy, do-it-yourself task. It takes skill and precision to complete all the steps necessary. This is possibly the single, most troublesome fixture to install as it requires its own 2" minimum vent and a drain of at least 3" in diameter. If the toilet is situated on a branch drain, it cannot be upstream from the sink or shower. The minimum side distance allowed from the center of the toilet bowl to a wall is 15 inches, and 12 inches from the center of the bowl to a bathtub; clearance from the front of a bowl to a wall or fixture should be 21 inches. You can find further do-it-yourself instructions from a local hardware store that sells Plumbing equipment.
What else can I help you with?
How do you install toilet partition by myself with tools?
To be frank,it's so hard for yourself to install such a big thing,why don't you enjoy the service of installing the seller provides?
How to install a wall mounted toilet?
To install a wall-mounted toilet, first locate the wall studs and mark the toilet's height on the wall. Install a carrier frame for support, connect the water supply, and secure the toilet to the frame. Finally, seal the toilet to the wall and floor.
When remodeling the bathroom does the ceramic floor get installed first or the toilet sand vanity?
You can install the vanity first. Then, install the tile up to the vanity and around the pipe for the toilet. Then, install the toilet. That way, you do not have to replace the tile should you ever have to replace the toilet.
Are toilet seats hard to install?
No, toilet seats are not hard to install. There are two bolts that go through the rear of the opening on the toilet and when these bolts are secured, the seat is installed.
Do I need permits to install another toilet?
Yes, you would indeed need a permit to install another toilet. They are easy to get.
How long does it take to install a new toilet by yourself?
The time it takes to assemble and install a new toilet is about one hour.
What are the steps to install a new toilet flapper in a toilet tank?
To install a new toilet flapper in a toilet tank, first turn off the water supply to the toilet. Flush the toilet to empty the tank. Remove the old flapper by disconnecting it from the flush valve. Install the new flapper by attaching it to the flush valve. Turn the water supply back on and test the new flapper by flushing the toilet.
Where is there instructions on how to install a new toilet?
When you purchase a new toilet seat, it is going to come with the instruction manual as to how to install the seat, when you get it in your home for installation.
How to install a wall hung toilet?
To install a wall-hung toilet, first locate the wall studs for support. Install a carrier frame in the wall for the toilet to hang on. Connect the water supply and waste pipes to the carrier frame. Hang the toilet on the frame and secure it in place. Finally, attach the toilet seat and test for leaks before use.
Install toilet flange?
howtoinstal anewtoiletflange
What is the proper way to install and tighten toilet bolts to secure a toilet in place?
To install and tighten toilet bolts properly, place the toilet on the flange, insert bolts through the base, add washers and nuts, and tighten evenly with a wrench. Be careful not to overtighten to avoid damaging the toilet or flange.
How can you install a toilet when the toilet closet is on an angle?
there are several flexy toilet conectors available to buy so a toilet can be fitted in any position provided there is room for it
