0
What else can I help you with?
What can you do about very rough bottom and sides in your concrete pool?
Replaster the pool and keep the water chemically balanced (PH, alkalinity level etc..) this will keep the plaster from pitting thus keeping it smooth for a longer life.
What do you do with the water in a new pool?
Check the chemicals with a pool test kit sold at most stores like Walmart or Kmart or a pool store. It shows how to check for PH balance and Chlorine. You must keep your chemicals balanced or the water will get cloudy or worse, green.
What is pH of pool chlorine?
The pH of pool chlorine typically ranges from 11 to 13 when used in its most common form, calcium hypochlorite. It is highly basic and can increase the pH of the water in a pool if not properly balanced with other chemicals. Regular monitoring and adjustment of pH levels are important for maintaining healthy pool water.
Does chlorine lower PH in the pool?
Yes, adding chlorine to a pool can lower the pH level as it increases the acidity of the water. This is because chlorine, in the form of hypochlorous acid, reacts with water to release hydrogen ions, thus lowering the pH. It is important to monitor and adjust both chlorine and pH levels regularly to maintain balanced water conditions in the pool.
We just bought a new above ground pool and have it nearly ready to use. We still have to do the ph testing; what is the average reading we should be comfortable with?
The proper pH level is around 7.4 to 7.6 If the pH is reading, 8 to 14 that would mean the pool has a high pH level. But if you have a low ph reading then your chlorine will dissipate quickly. To keep the swimmers in your pool comfortable and to keep your pool equipment in good shape, it is vital that the ph reading is balanced.
Does swimming pool water attack concrete?
If the water's chemistry is not correctly balanced, it can. For example, if your pH is too low, the water can etch cement you'd materials.
How does the pool pH level affect alkalinity in swimming pools?
The pH level of a pool affects the alkalinity by influencing the stability of the pool water. When the pH level is too high or too low, it can lead to fluctuations in the alkalinity levels, making it harder to maintain a balanced pool environment. Keeping the pH level within the recommended range helps to stabilize the alkalinity, ensuring the pool water remains clear and safe for swimming.
How clarify your pool?
To clarify your pool, start by testing the water's pH and chlorine levels to ensure they are balanced. Use a pool clarifier or flocculant to help coagulate and remove small particles that cloud the water. Run the pool filter continuously until the water clears, and regularly backwash or clean the filter to maintain efficiency. Lastly, keep the pool skimmer and vacuum clean to prevent debris buildup.
Can baking soda be used in a salt water pool?
Yes, baking soda can be used in a salt water pool to help maintain the proper pH levels. It can be used to raise the alkalinity of the water and prevent pH fluctuations, resulting in a more balanced and stable pool environment. It is important to follow proper dosing instructions to avoid over-treating the pool.
What does baking soda have to do with water purification?
In a swimming pool , baking soda (sodium Bicarboante) is used to help keep alkalinity levels in the right target zone. around 80-120 ppm. The important factor is it goes hand in hand with the calcium hardness (200-400) to achieve balanced water. When these are balanced it acts like a buffer for the ph and easier to maintain good clear water along with the sanitizer being used. Ph in turn can damage a pool if its too high or low and the sanitizers effect is related to the proper ph 7.4-7.6
Why can't you get in pool if the pH is low?
You can still get in the pool. The chemicals work best when the pH is balanced so add PH PLUS. If the PH is really low it is very acidic and could burn the eyes a bit
How do you raise the pH levels in your pool?
raising the pH level of the swimming poolThe recommended pH-range for a swimming pool is between 7.2 and 7.8. To raise or lower pH, alkali such as sodium carbonate (soda ash) or sodium bicarbonate (baking soda) will added to the water. thanks hope it helps you heaps!!
