To remove the oil sump on a 2002 Ford Fiesta 1.3, first ensure the engine is cool and disconnect the battery. Drain the engine oil and remove any components obstructing access, such as the exhaust or crossmember. Unbolt the sump from the engine block, carefully prying it loose if necessary, and clean the mating surfaces before installing the new sump with a fresh gasket. Reassemble all removed parts and refill the engine with oil.
how easy is it to change a oil sump gasket on a ford fiesta 1.4 diesel 2008
at the rear of the sump.
on the underside of the car under the engine and oil sump i reckon.
Sump drain plug is 13mm hexagon A 13mm 6 point socket will remove it.
Inside the crankcase (oil sump)
I am not aware of a 2002 Ford Fiesta! In the US?
Remove oil sump plug, drain oil. Replace oil filter. Replace oil sump plug. Refil with Mobil 1 oil
Easy, put the car on ramps. Remove the sump guard plasctics. Drain the oil from the sump. Disconnect the oil level sensor wires. Undo the 3 bolts on the bell-housing that holds unto the sump, you will need a 5mm ball-end allen socket. Undo the 20, 10mm head bolts on the sump bottom. Remove the sump, you may need to tap with a soft-head hammer. This is one of the easiest sumps to remove with the engine in the car.
To remove the sump from a VW T4, first ensure the vehicle is securely lifted and supported. Drain the engine oil and remove any components obstructing the sump, such as the oil filter. Unscrew the sump bolts and gently pry the sump away from the engine block, taking care not to damage the gasket surface. Finally, clean the mating surfaces before installing a new gasket and sump.
Remove nut from bottom of sump.
The oil pump is in the oil pan (aka the "sump").
To remove the sump from a Peugeot 306, first, ensure the vehicle is safely lifted and supported, then drain the engine oil. Remove the oil filter if necessary, followed by the bolts securing the sump to the engine block. Carefully pry the sump away from the engine, taking care not to damage the gasket or mating surfaces. After removal, clean the surfaces thoroughly before installing a new gasket and reattaching the sump.