To remove the oil sump on a 2002 Ford Fiesta 1.3, first ensure the engine is cool and disconnect the battery. Drain the engine oil and remove any components obstructing access, such as the exhaust or crossmember. Unbolt the sump from the engine block, carefully prying it loose if necessary, and clean the mating surfaces before installing the new sump with a fresh gasket. Reassemble all removed parts and refill the engine with oil.
how easy is it to change a oil sump gasket on a ford fiesta 1.4 diesel 2008
at the rear of the sump.
Sump drain plug is 13mm hexagon A 13mm 6 point socket will remove it.
on the underside of the car under the engine and oil sump i reckon.
Inside the crankcase (oil sump)
I am not aware of a 2002 Ford Fiesta! In the US?
Remove oil sump plug, drain oil. Replace oil filter. Replace oil sump plug. Refil with Mobil 1 oil
Easy, put the car on ramps. Remove the sump guard plasctics. Drain the oil from the sump. Disconnect the oil level sensor wires. Undo the 3 bolts on the bell-housing that holds unto the sump, you will need a 5mm ball-end allen socket. Undo the 20, 10mm head bolts on the sump bottom. Remove the sump, you may need to tap with a soft-head hammer. This is one of the easiest sumps to remove with the engine in the car.
To remove the sump from a VW T4, first ensure the vehicle is securely lifted and supported. Drain the engine oil and remove any components obstructing the sump, such as the oil filter. Unscrew the sump bolts and gently pry the sump away from the engine block, taking care not to damage the gasket surface. Finally, clean the mating surfaces before installing a new gasket and sump.
To remove the sump on a Vauxhall Omega, first, ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the sump, such as the exhaust or oil pipes, then drain the oil. Unbolt the sump from the engine block, taking care to remove any old gasket material. Finally, gently pry the sump away from the block and clean both surfaces before reinstallation.
Remove nut from bottom of sump.
The oil pump is in the oil pan (aka the "sump").