Get a repair book at the library. And you need a wheel puller, a tool.
Replacing a steering knuckle on a Chevy Colbalt is easy. All you have to is take the steering wheel off and replace the old one.
remove ceter cap on steering wheel to gain access to large nut romve nut then use a steering wheel puller assembly pull steerinr wheel off the shaft
it is under the dashboard on the left side of the steering wheel. It has a cover on it that just pulls off.
yes
yes you have to pull the steering wheel off, and becareful you don;t loose the spring.
In most cases you will need to replace the turn signal switch on the steering wheel for your 1983 Chevy Caprice Classic rather than fixing it. To replace it, remove the horn pad and then use a steering wheel puller and compressor to remove the steering column. You will then remove the signal along with the wiring harness and bus fuses. Replace the signal and wiring and then replace the steering column itself.
pull the steering wheel
How to remove steering wheel on Chevy lumina 2000
How to remove steering wheel on a 2001 chevy tohoe
u need a steering wheel puller and pull steering wheel and all turnsignal parts. one screw holds it in
A person removes the airbag, and then the steering wheel with a steering wheel puller. Then pull out the sensor and clock spring, replace both, and replace the steering wheel and the airbag.Ê
I suspect you are talking about the backlighting of the steering wheel controls. You have to change out the switches themselves per my GM dealer parts guy.