1) remove 1 screw in panel (visible), remove 1 screw in plastic door grip, remove 1 screw behind door opener. The screw behind the door opener is hidden and must be exposed by popping out the screw cover with a small screwdriver. 2) remove door panel by carefully pulling the panel away from the door using a large screw driver as a lever. The door panel is attached to the door itself in 4 places. Be gentle, dont break the plastic attachments. You only need to expose the door section closest to the mirror. 3) pry off (using a large screw driver) the plastic triangular-shaped cover that hides the mirror screws. It pulls straight out. 4) remove 3 nuts that hold the mirror onto the door. Disconnect the electric controls by pulling black plug out of the white socket. There is a notch on the black plug that must be pushed up to get the plug out of the socket. Push the white socket out through its hole, in the direction of the mirror. 5)reverse steps 1-4 for the new mirror.
very carefully lol
Yes it will fit
The headlight assembly on a 1998 Acura Integra is held on by brackets. To remove them loosen the bolts on the brackets. Pull the housings off. Install the new housings by placing them on the brackets.
unbolt the old one put in the new one
From the Haynes Acura Integra Repair Manual, 156 in-lbs.
On a 1989 Acura Integra hatch back the brake lights are reached through the hatch itself. The brake lights housing are on the rear of the vehicle. Unplug the bulbs and replace them.
1342
1997
it will fit but you need to convert it to a cable clutch because the 98's are hydraulic
27
Buy a new one from a auto part store and follow the instructions it will most likely come with
no such thign as a alternator sensor. if ur talking bout ur alternator prob means it needs to be replace