I have a 2002 ghia x 24v, and this is from my owners guide that i got with the car, a maximum of four keys with radio frequency remote control can be programmed for your vehicle, to progamme new keys with radio frequency remote control turn the ignition key to position II four times within six seconds, switch off the ignition, a tone sounds to indicate that it is now possible to programme new keys with radio frequency control for ten seconds, press any button on a new key with radio frequency remote control, a tone will sound as confirmation, repeat this last step for all your keys with radio frequency remote control, including your original keys, switch the ignition back on or wait for ten seconds without programming another key to end the key programming, only the keys with radio frequency remote control which you have just programmed are now able to lock and unlock your vehicle, KEY CODING, a maximum of eight keys in all can be coded for your vehicle, complete each of the following steps within five seconds, insert the first key in the ignition switch and turnto position II, turn the key back to position 0 and remove from the ignition switch, insert the second key in the ignition switch and turn to position II, turn the second key back to position 0 and remove from the ignition switch, the key coding mode is now activated, if any uncoded key is now inserted in the ignition switch and turned to position II within ten seconds, this key is coded to the sysyem, after the coding process is completed remove the key from the ignition switch, wait five seconds for the system to be activated,hope this helps, Roger.
All ford diesels from around 2002 onward have a timing chain, I have an 05 mondeo 2.0tdci ghia estate and this has the timing chain, so no cambelt worries or costs.
Ford has only made one model of the Mondeo Ghia X, however; there are many previous models of the Mondeo. There are Mondeo models dating back to 1992 and there are five different generations of these models. The most recent model is better known as the Ford Fusion.
No because the glass size and the mountings for the door are different.
yes
according to all the lit it doesnt have one its chain driven
if your mondeo is a duratorq engine then it should have a camchain
Wiring diagrams for my mondeo are in the Haynes Manual. Go to www.haynes.co.uk or go to a Halfords wher they stock most of the manuals. Always get a haynes manual :)
its the second wired plug towards the engine on the air intake pipe
the fly wheel is the thing that goes on a mondeo, so you better do that @ he same time as the clutch, but you are looking at £800 -1000 all in, but only use original ford parts, not patnt, cos u will regret it on the mondeo
5 stud
On the body tag, usually on a doorpost.
same as mine (REPLACE COIL PACK)