0
The 1996 Ram is fuel injected and does not have a choke.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you test the egr valve on a 1996 dodge ram 1500 rear drive?
A 1996 Ram does not have EGRA 1996 Ram does not have EGR
How do you test a choke diaphragm on a tpi 1991 chvey 350?
You can't, It does not have a choke. It is fuel injected.
When you shift into 4X4 on my 1996 Suburban it stays in 2High Why?
Need to check the 4x4 Actuator on the front housing to see if its working And there is a electric switch on the top of the transfur case that sends power to the front actuator that ingages ring and pinion. Be sure to check fuse with a test light ( Fuse Box )
How do you test the actuator?
If it's vacuum (has hose) just apply vacuum.
How will you test starter and choke in fluorescent tube?
You can use a wire instead of the starter to test the tubes .. I did it, it works !
Why does Central locking not work on back passenger door Ford Falcon gli?
probably because the door lock actuator for that door is faulty. i would test the actuator first.
How do you test a wastegate actuator on a 1988 sunbird turbo gt?
There should be a boost line going to the actuator. Pull that and attach a line with a pump and gauge. When you apply pressure to the actuator it should move. Should take 8-12 lbs of pressure
What has to be done in order use a carburetor with an electric choke instead of a manual choke?
When using an electric choke you will need to take the manual choke unit out and replace with the e.choke unit. Run power and ground to unit and then adjust to ambient tempature. Then test and tune
How do you check the choke is working or not?
chock has two terminal plug in live one terminal and test another with test pen.if the test pen light the chock ok
How do you test a choke diaphragm on a tpi 1987 Chevy 350?
It does not have a choke, the computer richion's the fuel up or leans it out. The coolent sensor reads water temp, If coolent is cold then the engine will run rich just like a choke that's closed does.
How do you test elec actuator?
If it's an actuator that works off an electrical circuit, apply electricity (the body of the device will be - or negative or ground if there is no - or negative or ground wire to the device)/ if it is a vacuum device, then you will need to apply vacuum to determine it it "actuates".
Could my '03 Honda Accord's passenger side power lock not be working because of the actuator even though it's not making a clicking sound as others who also have this issue have posted?
Certainly. the best way to find out is to test the connector at the actuator for current when the button is pushed. if no then check wiring and switches, if yes replace the actuator.
