AC current alternates polarity back-and-forth continually, by definition. Therefore, it is not possible to reverse AC direction. It is DC current that is directional such that when it's polarity is reversed the motor responds by turning in the opposite direction.
We have suppose the current flow in opposite to the direction of flow of electron.AnswerA.C. current reverses direction every half-cycle.
The direction an induction motor will turn depends upon the direction of the rotating field setup by the winding. Remember in AC the direction of the current reverses itself 120 times every second for a 60 hz system. So no it will not turn in the "direction" of the current.
kettles generally run on alternating current (AC) as do most household appliances. although the heating element can run on either alternating or direct current (ac or dc) as long as the voltage is the same. for example if you were to plug your kettle into your car battery it wouldn't do very much if anything. however if you were to wire ten car batteries in series ( thus creating 120 volts dc) the kettle would heat up as it normally would.
The commutator is the moving part of the electrical switch in motors that reverses the current direction between the rotor and the external circuit. This is applicable in electrical motors and electrical generators.
A DIAC operated with a DC voltage across it behaves exactly the same as a Shockley diode. With AC, however, the behavior is different from what one might expect. Because alternating current repeatedly reverses direction, DIACs will not stay latched longer than one-half cycle. If a DIAC becomes latched, it will continue to conduct current only as long as there is voltage available to push enough current in that direction. When the AC polarity reverses, as it must twice per cycle, the DIAC will drop out due to insufficient current, necessitating another breakover before it conducts again
An "Alternating Current" (AC).
AC (alternating current).
This is known as a direct current or DC. The two major types of currents are AC (alternating current) and DC (direct current). In AC the charges move back and forth, but in DC the charges flow in JUST ONE DIRECTION. Due to this characteristic it will not reverse direction like AC can.
We have suppose the current flow in opposite to the direction of flow of electron.AnswerA.C. current reverses direction every half-cycle.
this is because ac appliances need regular reversal in magnitude and direction whereas dc need a regular supply.. so no output will be produced when using ac.. that's why we use dc appliances!!!!
Assuming you mean "rectifier", a rectifier is an electrical device that converts AC, which periodically reverses direction, to DC, which flows in only one direction.
An AC current (alternating current) is one that changes its direction continuously - typically at 50 or 60 Hertz (cycles per second).
A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction.
Alternating Current (AC) reverses its flow constantly, unlike DC (constant current) which flows in one direction only.
120 V or 240 V AC
An electric device that produces an electric current that reverses direction many times per second. Also called a synchronous generator.
Because some appliances work with ac current and some with dc current.