Connect the satellite receiver to the surround receiver. You can then use the receiver to switch between this source and the the DVD or Blu-Ray player.
You cannot connect a projector to a TV directly. The connections on the TV for video are inputs, not outputs. You need to connect a source such as a DVD player or cable or satellite receiver to the projector.
You could use an external cable or satellite receiver and connect speakers to that.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
The direct answer to this would be, no. But I think you might be asking the wrong question. To get surround sound to play your television programs you would need to put your cable/satellite box through the receiver. As a side note: There are two ways to do this. 1. If you receiver supports video pass thru (which would mean that there are VIDEO IN jacks and VIDEO OUT jacks) If not then proceed to the next option. You will hook up everything from the cable/satellite box to the receiver and just one cable, which will be the video signal, to the television. 2. You will hook up only the audio cables to the receiver and a single video cable straight to the television.
Use a high-end surround receiver. It will be able to connect to all of these things, and allow you to switch the source with a remote control.
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
You cannot connect a projector to a TV directly. The connections on the TV for video are inputs, not outputs. You need to connect a source such as a DVD player or cable or satellite receiver to the projector.
You can connect your standard definition TV to your satellite receiver in a couple of ways. First, if your TV has composite video/audio inputs (yellow, red, and white RCA jacks), you can connect to these inputs using the composite video outputs of the satellite receiver. Another alternative is to use the standard coaxial cable output from your satellite receiver to connect to the 75ohm antenna input on your TV. *Note: Neither of these connections will display high definition programming on your standard definition TV. The TV is only capable of standard definition, so you will see a clear picture, but it won't be true high definition, regardless of the input signal's definition.
no yes
You could use an external cable or satellite receiver and connect speakers to that.
This depends on the brand your satellite tv receiver is. If your receiver is for example, Dreambox, than you could connect it to a computer via the RS232 port or via the ethernet port located on the Dreambox receievr. On other brands, this may be different. On some brands you can not connect a tv receiver to a computer. So this is different for all receivers. Also, some special softwares would be needed to establish the conenction between computer a receiver.
Connect with HDMI cable whenever possible for everything
Dreambox works like all satellite tv receivers work. It decodes the signal coming from the satellite and allows you to watch satellite tv channels on your tv. You connect the dreambox to your satellite antenna, than connect it to your tv, and do an auto scan, and you can watch satellite tv channels on your tv. Almost all Dreambox are HD, so you can watch HD channels using dreambox receiver. Dreambox is a more advanced satellite receiver, allowing users to gain more control over the receiver and uses advanced softwares and ecryptions. This is why it is considered to be among the best satellite tv receivers.
The fit a cable to an external aerial dish, one must check the satellite receiver to find the coaxial socket. Connect the cable from your satellite receiver to the external antennae socket.
A satellite dish is designed to connect to a satellite receiver unit. Generally they are dedicated devices. There are a few satellite receiver cards or devices that can be installed into a computer and will operate as a video input card for the computer. These are specialist devices and will not be found as a standard feature on any computer. Normally, to capture a video feed, the output form a dedicated satellite receiver would be connected to a video input port on the computer. Again, the video input is a specialist device typically used in video editing and not usually found as part of a standard computer set up.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
A coaxial cable has great uses in television antenna connections. TV satellite connections also use coaxial cables to connect decoders to the TV set.