hot wire on the timing light goes to pos. side of the battery and the neg. side of timing light goes to ground on the engine someplace and then the plug clip goes on the #1 spark plug wire.
5x4
Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few.
Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few to complete the project.
i have a 1970 dodge dart with a slant 6, 225 and need to know if a 318 out of 1970 dodge dart will mount up with the motor mounts and tranny.
The firing order is 1-5-3-6-2-4.
1-5-3-6-2-4
Slant - journal - ended in 1970.
The easiest way to approach putting a 318 into a slant 6 1970 dodge dart would be to purchase a conversion mounts. This will give you all that you need to make an easy transition. Note, you do not need to alter the K, simply acquire the mounts and it should fit nicely.
To make a 318 into a slant 6 engine on a 1970 Dodge Dart you will need new engine mounts, fuel lines, and bigger radiator. What needs to be done first is to remove the old 318 and add the new engine mounts first. This is not something that should be done if you don't have the proper tools and equipment.
I assume you mean dodge coronet. The 70' came standard with slant six, optional 318, 383 two barrel, four barrel, 440 magnum and Hemi.
There were 2 CID's for the little inline 6 cylinder. L6 3.2L 198 CIDL6 3.7L 225 CID Hope this helped.
434 i think not confident though maybe ask on dieselstation.com or something i think they have something there. sorry