Torque is defined as force multiplied by the distance, from the axis of rotation, at which such as force is applied.In the case of an engine, I believe the torque would have to be measured.
You will need to have some information ready. It is good to know the horsepower and the torque of your diesel engine.
To calculate the gross torque of a 10 horsepower (hp) engine, you can use the formula: Torque (in foot-pounds) = (HP × 5252) / RPM. For example, if the engine operates at 3600 RPM, the torque would be approximately 14.75 foot-pounds. However, the actual torque will vary depending on the engine's RPM and design characteristics. Generally, a 10 hp engine can produce around 20-25 foot-pounds of torque at its peak operating RPM.
how to calculate hydraulic motor torque
Peak torque is typically measured by running the engine on a dynamometer and recording the maximum twisting force produced by the engine. The peak torque value is usually given in foot-pounds (lb-ft) or Newton-meters (N-m) and represents the maximum rotational force that the engine can generate at a specific engine speed.
The torque output of a 5 horsepower (hp) engine can vary depending on its design and operating speed. However, a common approximation is that at 3,600 RPM, a 5 hp engine typically produces around 15-20 foot-pounds of torque. To calculate torque, you can use the formula: Torque (ft-lbs) = (Horsepower × 5252) / RPM. Therefore, at 3,600 RPM, a 5 hp engine would yield roughly 15.5 ft-lbs of torque.
You need to measure the torque of the engine. This is best done at the rear wheels using a rolling road dynamometer. You will get a readout giving the torque throughout the rev range. To convert torque into bhp do the following calcluation: bhp = (rpm x torque)/5252
what is the torque on a 1999 Yukon engine
Measure the rpm & calculate the torque as power divided by angular velocity
454 engine torque is 752 pounds of torque
Torque output of the engine at that speed.
The torque converter is between the engine and transmission.The torque converter is between the engine and transmission.
how to calculate hydraulic motor torque