The selector knob is in the center stack of the dash to the left of the radio ( if you have the 4x4 Control Trac system with a 2 speed transfer case ) 4x4 auto / high / low positions . If you have a 5.0 L - V8 engine with the AWD system , power is always supplied to all 4 wheels and I don't believe there is a selector knob .
There isn't one. In 1997, mountaineers were either 2 wheel drive or all wheel drive. Not 4 wheel drive
You can't disconnect the 4-wheel drive. The Mountaineer is a ALL WHEEL DRIVE S.U.V.
( 4R70W ) automatic transmission is used on the 1998 Mercury Mountaineer 5.0 L - V8 all wheel drive
On a 2005 Mercury Mountaineer : All Wheel Drive ( AWD ) has engine power going to all 4 wheels , all the time , and doesn't require any driver input
No.
how do you change wheel bearing on 98 mercury mountaineer
wheel bearings mountaineer 2004
The fuel pump is in the fuel tank.
According to the 1997 Mercury Mountaineer owners manual : ( 13.9 quarts / 13.2 liters ) for the 4R70W automatic transmission ( rear wheel drive and all wheel drive ) ** that would be for the entire system , transmission , converter , lines , etcetera **
If your vehicle has 4 wheel drive, then yes, it has a differential in the front axle.
According to the 2007 Mercury Mountaineer Owner Guide : ( there are 5 lug nuts per wheel )
3aaa has a book on towing if its all wheel drive you can' T TOW WITHOUT REMOVING DRIVESHAFT FIRST