If the antenna cable is connected to a splitter the signal drops 50% to each TV. This might be too low for the TVs to work. The solution would be to use a powered splitter instead of a passive one. This type will produce a full power signal at each output.
etheir steal it of buy it
There are a host of cable TV channels that you can order from. Most cable company's have a portal on there cable service which allow you to order channels and movies directly from your TV.
If you are spliting your own cable in your own home, electronic supply stores sell a cable spliter. If you split the signal too many times, it degrades, and you will have to contact the cable company to have your signal boosted. However, depending on the provider, you may be charged for additional connections. Service from basic cable is controlled by the tuner of your TV or cable box. Spliting a signal after a digital tuner will produce the same channel on every TV after the split.
It is hard to understand your question, but if you are referring to why you cannot get all the channels when you split the cable is becaue you have to have a cable box hooked directly to the TV in order to access all the channels. It is the cable companies way it racking in more money and it works. The cable box is used to decode the signals in order to get access to all the channels.
Call your cable company, they control which channels you get.
no why would it it records direct TV channels not cable channels you can get a Comcast cable DVR for only $10 a month
There are several television channels in the state of Arizona. Each cable company or satellite company has a different set of channels. To find out your channels, contact your cable provider.
your regular cable channels are on direct tv as well they are just on different channels.. but you automatically get them and more on Direct tv
One can find free channels for cable television by accessing public access television channels. Another option for finding free channels is using the public broadcast channel.
The connect more than 2 TVs to a receiver, you need to splitter to split the signal for the TV to take to another TV. You can get a splitter at Radio Shack. The cable should be a RG6 coax cable. If you want to split TV 1 with anything other than a coax cable you need to get a special splitter for the type cable you are using from the receiver to the TV; RCA, component, or HDMI. HDMI does have a length limitation. When you mirror 2 TVs, the same program is on both TVs; when you change channels it will change both TVs channels.
Freeview cable delivers a multitude of channels in the UK ranging from television channels to radio stations. Some of the channels it offers are BBC and ITV.
You can request they send a list or sometime the local TV guidse show cable channels.