Want this question answered?
The motors were installed with rivets at the factory. You need to use a drill and drill out the rivets to remove the motor. The replacement motors come with screws and bolts to replace the rivets.
My 93 Mercury's windows are off track. They stay on track until I manually push them up and they go off track. I have been told that you have to drill out the rivets that keep the window on track, adjust them, then replace the rivets with a bolt and nut.Could this be right?John
remove radio from a grand marquis 2003
You don't let some else do it. I say this from experience on a 2004 The motor is separate I used the old motor and replaced the regulator. I had to drill out rivets OH ya I BROKE the window drilling out the rivets that hold the window onto the regulator. after that I reattached the motor assembly with bolts and nylon lock nuts. then went to a glass shop to have the window replaced.
To remove the heater core on a 1992 Grand Marquis, first remove the dash board. Then remove the AC box to have access to the heater core.
how to remove right turn signal relay on 1986 mercury grand marquis
i have a 95 mercury grand marquis how do i remove the passtime device You should NOT unless you paid off the car. the dealership will then remove it.
remove stud locks
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
It is a good job and there are spring loaded llinkages etc. Get a manual on your car from the local parts store.
Type your answer here... how do you remove passenger door panel on 2001 mercury marquis to replace door lock.,
You can remove the door panel. And there are 3 star bolts that hold the power window motor. Once you remove the motor you can remove gear cable from motor and pull up the window by hand. That is the only way I know of. I had two motorcables brake on me.