twist it to the left and pull geez
My Jeep Wrangler is like that. I'm going to try and dry out the dist cap in the house and reattach....maybe?
nevermind i found it,
the gas cap is located underneath the license plate bracket the plate usually pull downward to reveal the gas cap
On top of the distributor. The thing with all the plug wires coming out of it.
its on the valve cover right behind the oil fill cap..
back of the oil pan Inside the last main bearing cap.
It is located in the fuel rail very close to the fuel injectors it will have a plastic cap on it
I usually have to use a large pair of channel locks to get it loose. The key operative word is GENTLY apply enough pressure to grip but not too much to risk breaking the cap. I have a 91 Wrangler & this works for me.
1-5-3-6-2-4
I replaced the crank sensor and the cam pick up that is under the distributor cap and still the wrangler wants to stall or back fires and bucks at 1200 to 2000 RPM when accelerating
To reset the gas cap error code on a 2009 Jeep Wrangler, first, ensure that the gas cap is properly tightened and in good condition. Then, disconnect the negative terminal of the battery for about 15 minutes to clear the error code from the vehicle’s computer. After reconnecting the battery, the check engine light should turn off if the issue was solely due to the gas cap. If the light remains on, further diagnostics may be needed.
replace your radiator cap it may be letting hot coolant travel back to the overflow can.