Do you mean valve "lash?" (The slack between the closed valve and the cam base circle.) That is adjusted the same way as on any other engine. Remove the valve cover and locate the adjustment screws on the rocker arms. Turn the crankshaft to position the rocker on the base circle and check the gap with a feeler gauge. Repeat for each valve.
there are 8 intake valves in that engine. They are located in the cylinder head, 2 per cylinder.
There are two types of valves in an engine. The valves are located in the head. There are exhaust valves and fuel intake valves
On a 1999 Ford Taurus : If you have the 3.0 " Vulcan " V6 engine ( which is an Over Head Valve / pushrod design engine ) there are ( a total of 12 valves , 2 valves for each engine cylinder ) If you have the 3.0 " Duratec " V6 engine ( which is a Dual Over Head Cam design engine ) there are ( a total of 24 valves , 4 valves for each engine cylinder )
Engine cylinder head valves admit the air/fuel mixture and release the burnt gases.
Engine Classification according to Fuel Used Gasoline Engine uses gasoline as fuel. Diesel Engine uses crude oil as fuel. Engine Classification according to Method of Cooling Indirect Cooling System usually called water engine. Direct Cooling System usually called air cooled engine. Engine Classification according to Cylinder Arrangement Vertical or Inline Engine has cylinders have vertical center lines arrange one after the other. Horizontal Engine has engine with horizontal center line of cylinders. V Type Engine has engine block or cylinders resembles a letter V shape. Radial Engine has cylinders arranged in radial manner. Engine Classification according to Valve Arrangement T Head Arrangement has valves arranged in both side of cylinder block. All intake valves in one side all exhaust on the other side. L Head Engine has intake and exhaust valves arrange in one side of cylinder block. F Head Engine have intake valves in the cylinder head and exhaust valves on one side of cylinder block. I Head Engine has all intake and exhaust valves located in the cylinder head block.
There is no reset.
Blown head gasket
No
The purpose of the cylinder head is Luke Cooper
major engine damage, including valves, possibly piston damage, certainly a cylinder head off job, maybe quicker and cheaper to replace engine
diesel engine
A 4-cycle engine that has the intake and exhaust valves located in the cylinder head.