Want this question answered?
how do you remove the door panel on a 2001 dodge stratus?--2 door
To remove the sliding door panel on a Dodge Grand Caravan begin by removing the top plastic panel. Then remove the bottom piece after unscrewing a few screws located on the bottom half of the vans door panel.
no no
Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
Using a screw driver, remove all of the screws and the clips from the panel of the car. Pull the panel away gently, remove any wire connectors, and then pull the panel off the door.
There are 10 Phillips screws holding the door panel on. First you would need to remove those. Then you can remove the door panel from the door. On the backside of the door panel you would need to remove the plugs from the backside of the switches. Then you can remove the screws that hold the switch into place on the door panel.
You have to remove all of the Phillips screws,the door handle and the master power window switches. Then tug up on the door panel and it will life right off.
Remove the inside door panel from your 1996 Dodge Avenger. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install your new door handle.
Disconnect the battery. Remove the door panel. unbolt the door lock motor, and remove the wiring plug. Replace the motor and put the panel back on.
Using a screwdriver, remove the screws and clips from the panel of the car. Gently, pull the panel away, remove any wire connectors and the panel will come off completely.
Take off the inside of the door panel the bolts are in tie in side of the door