Want this question answered?
Its refered to as a harmonic balancer, and you have to have a special tool to remove it called (surprisingly) a harmonic balancer removal tool. The installation tool is a good heavy hammer and a block of wood. If you dont have access to this special puller, you can (and likely will) damage the harmonic balancer, so it would be best in that instance to take it to your local mechanic and ask him to take pull it off for you.
very carefully
ONE IS ON THE BLOCK, FIREWALL SIDE. tHE OTHER IS BENEATH THE HARMONIC BALANCER ON THE FRONT.
You can go to Autozone.com and it will give you directions.
Near the harmonic balancer. Passenger side, lower corner. Needed to remove the plastic guard, loosen serpentine belt and a compressor to replace the unit. Just did so on my 2003 over this past weekend.
Dealer quoted me between $400 and $500.
you could have a bad harmonic balancer on the front of the crankshaft. sometimes they are known to separate. also, really worn out u-joints in the driveshaft. Or a driveshaft that is bent or out of balance you could have a bad harmonic balancer on the front of the crankshaft. sometimes they are known to separate. also, really worn out u-joints in the driveshaft. Or a driveshaft that is bent or out of balance
it is on the passenger side of the motor near the harmonic balancer you have to take the passenger wheel off and remove the splash panal to get to it
The 2003 Kia Sedona has 24 valves.
The 2003 Kia Sedona has a V6 engine.
The 2003 Kia Sedona is a gas-powered vehicle.
The 2003 Kia Sedona has a 5-speed automatic.