You can pull it out and take it to most auto parts stores to have it tested, that is what I usually do. You can test it yourself with a volt meter. You need one that will test the amperage draw. I am not sure what the specs are for that starter. You can usually get the specs from your locol auto parts store. I think it has to be tested at the starter on the pos lead. As a starter wears, it will pull more amps then what the sytem can put out. Hight amperage draw means higher wear, or need for replacement. I hope this helps Ben
can you tell me were I can find my starter on my 1997 Grand AM GT
You know the starter is going bad when you have a dragging starter.
no.
Trouble changing gears, either upshifting or downshifting.
Ansewer the question for me then I'll tell you the ansewer......
A way to tell is by the sound the motor makes. If it is winding slowly with no force it could be going out. If it skips or whines without action it is out.
go to www.kellybluebook.com and it will tell you the value
you probably have a bind the burning smell is probably the wire going to your starter you need to find out what it is, try tightening the starter then replace if need be
On the bottom of trans. You are going to have drop one of your motor mounts 6 to 8 inches. They will tell u that they have to go inside the trans but they dont.
It's So Hard to Tell Who's Going to Love You the Best was created on 1997-08-19.
normally the strongest bakugan is the starter bakugan
If it starts putting on a top hat ant coat and a flower in its lapel i guess you can consider that its going out.