Want this question answered?
the abutments at either end of the bridge anchor the arch so that it will not collapse, the weight of the arch is supported by the abutment on either end
Arches are among the oldest forms of structural support. Unlike beam bridges, arch bridges are curved. The arch carries the weight outward along the curve to the supports on each end of the bridge, called abutments. The abutments carry the load and stop the bottom of the bridge from spreading out.
An arch bridge is a bridge with abutments at each end shaped as a curved arch. Arch bridges work by transferring the weight of the bridge and its loads partially into a horizontal thrust restrained by the abutments at either side. A viaduct (a long bridge) may be made from a series of arches, although other more economical structures are typically used today.
The arch bridge spreads load (the weight of the bridge and the traffic on it) from the deck to the abutments (the supports at each end) and into the ground. This creates a lot of compressions.
A structure for resisting the pressure of water against a bridge. It supports or receives the thrust of part of the arch of the bridge. It absorbs the tensions. It receives the arch at the end of a brdge
Bridges are made up of triangles joined together to form a truss. Triangles are very strong because they carry weight in tension and compression instead of bending and can hold a lot more than a beam that bends can
coigne
a suspension bridge
the part of a bridge supported by the piers and abutments
An arch bridge. I think that may have been discovered quite some time ago !!! +++ It was - the Romans used arches extensively, in buildings as a well as for bridges. However, the arch is indeed stronger than the plank, or simple beam, bridge because it transmits the loads to its abutments. You can stiffen a beam bridge by fitting it with vertical side-members, or in larger structures, frames (trusses).
because of the support of the circles
giant cables and abutments