A person called a locator steers the drill head, he has a lil box which tells him where the bit is, how many ft deep, and what direction its pointing, 12-12 oclock, and then he tells the driller, and the process goes from there
try www.digitrak.com
what doesnt it do?! hmmmmmm
The hydraulic three-way directional control valve is designed to operate an actuating unit in one direction. It permits either the load on the actuating unit or a spring to return the unit to its original position.
A spring device which maintains the spool of a directional control valve in position.
-Directional and control devices -inertial guidance system -stabilizing device -helicopter
cold chamber die casting machine can be divided into the direction of the direction of the flow of fluid in the hydraulic system used to control or regulate the pressure and flow valves, pressure valves and flow control valve three categories. A same shape as the valve, because of the different mechanisms of action have different functions. Pressure valve and flow valve with a throttle effect of the flow passage cross section to control the system pressure and flow direction valve replacement of the flow passage control the oil flow direction.
A hot air balloon pilot has control over the vertical axis of flight only. By heating the air in the balloon, the pilot can control the vertical flightpath in an upwarddirection. By releasing hot air or by letting the air cool down, the pilot can affect the vertical axis of flight in a downward direction. Any other directional control (the horizontal flight path) is controlled by the wind. the only control the pilot has in the horizontal flight path is by taking the balloon up or down into the wind which flows in the direction the pilot wants to travel.
The 'control pad' is the + shaped directional button.
what doesnt it do?! hmmmmmm
dfrere
Directional control valves are one of the most fundamental parts in hydraulic machinery. They allow fluid flow into different paths from one or more sources. They usually consist of a piston inside a cylinder which is electrically controlled. The movement of the cylinder restricts or permits the flow, thus it controls the fluid flow. Directional control valves are mainly two types: Hydraulic and Pneumatic. Hydraulic directional control valves are for a liquid working fluid (e.g. water, hydraulic oil) and pneumatic directional control valves are for a gaseous (usually air) working fluid.
If the TV antenna was built for the correct frequency, it would work but my second thought is do you want the antenna to send a directional signal? I would think a "omni" signal (all direction pattern) would be a better choice. Most TV antennas are directional.
yes
my directional lights and speedometer do not work could this be control mudule?
horizontal datum note. good luck on NovaNet!
The hydraulic three-way directional control valve is designed to operate an actuating unit in one direction. It permits either the load on the actuating unit or a spring to return the unit to its original position.
yes
You can control sound wave direction, by changing the direction and pressure of air.