0
How do they set the front gear timing on qsx15-g3 on cumming generator?
Wiki User
∙ 14y ago
QSX15 Engine Base Timing.
Tools required;
* Timing tool kit, part no. 3163021,Timing tool kit contains some wedges and a pin.Timing Pin, part no.3163020, and three sets of timing wedges, part no.3163024, 3163026 and 3163027
* Workshop manual, Part no. 3666239 (this manual is required for setting backlashes, clearances and also for bolt tightening torque values etc. to the manufactures standard)
Ok you have the timing tool kit in your hand and now you are ready to set Engine base timing, so you have to know the timing code for the engine you are working on. the timing code is located on the engine data plate.
Timing code (inj / Valve) 4/6. well something like that and it depends on your engine.
as you can see the written order of the timing code, the first code is for the injector wedge, the second code is for Valve wedge.
so that means you have to use the wedge with the injector timing code for the camshaft injector and the wedge with valve timing code for the camshaft valve.
Procedure:
* Rotate the crankshaft until the crank pin mark on the outside diameter of the damper is aligned with the mark on the gear housing. * remove the plug from the cylinder block which is on the intake side of the engine block (front side) almost to the center to the crankshaft about one foot away from the gear cover. (i think this explanation is ok for the location of the plug for pin). * insert the lock pin and lock the crankshaft in place. * rotate camshafts to the proper position ready for wedge insertion. look at the camshaft near the second bearing for the camshaft from the gear cover.
* inset the appropriate timing wedges for the appropriate camshaft, injector wedge for the injector camshaft, Valve wedge for the valve camshaft. the wedge is inserted between the camshaft and cylinder head, the location for the wedge on QSX15 is near the second bearing for the camshaft from the gear cover. * lightly tap the top of the wedge with a mallet to make sure it is properly seated.Do not drive the wedge into place.Engine damage can occur. * Follow gear installation and backlash procedure.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the oil pump in a dodge intrepid?
On the front of the crankshaft, under the timing covers.On the front of the crankshaft, under the timing covers.
Where is the oil pump located on a 2004 Dodge 3.7 motor?
Under the timing chain, on the front of the crankshaft.Under the timing chain, on the front of the crankshaft.
How do you turn off the generator in new mauville in Pokemon ruby?
step on a button in front of the generator
Where is the water pump on 2007 Chrysler sebring?
Inside the front of the engine, driven by the timing belt on a 2.4L and the timing chain on a 2.7L.Inside the front of the engine, driven by the timing belt on a 2.4L and the timing chain on a 2.7L.
Where are the Timing marks on a 4gj2 engine?
front timing cover
Where is the oil pump on a 2004 Chrysler PT Cruiser?
Under the timing belt sprocket, on the front of the crankshaft.Under the timing belt sprocket, on the front of the crankshaft.
Where is the water pump located on a 96 Chrysler cirrus?
Inside the front of the engine, driven by the timing belt.Inside the front of the engine, driven by the timing belt.
Where is the water pump located in a 1999 Chrysler Sebring 2.5 v-6?
in the front of the engine it is driven by the timing belt.in the front of the engine it is driven by the timing belt.
Where is the water pump on a 1999 Chrysler lhs?
It is inside the front of the engine. On a 3.5L it is driven by the timing belt. On a 2.7L it is driven by the timing chain.It is inside the front of the engine. On a 3.5L it is driven by the timing belt. On a 2.7L it is driven by the timing chain.
Where is the oil pump located on a 2006 Chrysler 300 5.7?
It is on the front of the crankshaft, under the timing chain housing.It is on the front of the crankshaft, under the timing chain housing.
Where is the water pump in 95 Chrysler LHS?
On the 3.5L it is inside the front of the engine, driven by the timing belt.On the 3.5L it is inside the front of the engine, driven by the timing belt.
What is the timing marks on a 1992 GM 2.5 engine?
The timing marks can be found on the flywheel and the front pulley on the front of the engine. The timing marks indicate when a certain piston is at its top stroke.
