Want this question answered?
On a topographic map, you can identify a hill by examining the contour lines. Contour lines that form closed loops are an indication of a hill or a mountain. The closer the contour lines are together, the steeper the slope of the hill.
If the topographic lines are closer together it means that it has a steeper slope grade, if they are farther apart, it means that they have a more relaxed slope grade. There is usually a scale on the map that can tell you in exact measurements of the slope.
On a topographic map, elevation is represented by countour lines, which is two lines that connect without intersecting. Relief is also shown by contour lines but also with a variety of other methods, such as shades and colors.
countour intervals
If the contour interval is not given, find two reference (labeled) contour lines and find the number of lines between them, excluding the reference lines themselves. Then the interval can be found using the following formula: |(Difference between elevation of reference lines)| /(Number of contour lines between reference lines +1) = Contour interval For example, if you find two reference lines labeled 150m and 250m and there is one contour line between them, then |150m-250m|/(1+1)=100m/2=50m The contour interval of that map is 50 meters.
On a topographic map, you can identify a hill by examining the contour lines. Contour lines that form closed loops are an indication of a hill or a mountain. The closer the contour lines are together, the steeper the slope of the hill.
contour lines that are very close together
If the topographic lines are closer together it means that it has a steeper slope grade, if they are farther apart, it means that they have a more relaxed slope grade. There is usually a scale on the map that can tell you in exact measurements of the slope.
It uses contour lines which are very close together.
It uses contour lines which are very close together.
On a topographic map, elevation is represented by countour lines, which is two lines that connect without intersecting. Relief is also shown by contour lines but also with a variety of other methods, such as shades and colors.
The US Geological Survey's topographic maps have "contour lines" showing elevation. The farther apart the contour lines are, the more gentle the terrain is; the closer together they are, the steeper the terrain is. The darker contour lines typically denote 100-foot elevation changes and are marked as such, while the lighter lines typically indicate 10 or 20-foot changes in between. The interval can easily be determined by counting the number of lighter contour lines between the darker lines. The steepness of the slope can be determined by using the map's scale (which is indicated at the bottom of the map) to measure the distance between two points and using the contour lines to see the change in elevation.
countour intervals
Contour lines enable us to see changes in elevation using an overhead map
A typical topographical map is printed on a grid that enable a position to be found, or given, by using a grid reference. Elevation is shown by using contour lines. Contour lines show areas of the same height, and the lines may be set at 50 metres between them. Therefore, two contour lines have a height of 50 metres between them.
Most people are probably familiar with contour lines found on topographic maps, which show elevation. Contour lines can also show weather and climate data, such as temperatures and humidity. Less common, bathymetry (the depth of water bodies) can also be shown using contours.
If the contour interval is not given, find two reference (labeled) contour lines and find the number of lines between them, excluding the reference lines themselves. Then the interval can be found using the following formula: |(Difference between elevation of reference lines)| /(Number of contour lines between reference lines +1) = Contour interval For example, if you find two reference lines labeled 150m and 250m and there is one contour line between them, then |150m-250m|/(1+1)=100m/2=50m The contour interval of that map is 50 meters.