You do not have to turn the heater on until you are ready to heat the water, some installers put a tee or bypass before the heater so the water does not go thru the heater many do not since the heater is on the clean side of the filter, some people just want a bypass valve their in case the heater fails they can keep the water flowing around the heater, Take the cover off, start the filter up, start vacuumimg, when ready add your chemicals. continue running the filter get your water tested, when you feel you are about ready too swim turn the heater on too warm the water if you desire to.
Yes! Connect a garden hose to the output valve of the water heater and open the water heater valve to put hot water into the kiddie pool. This is the fastest way to warm a children's pool.
form_title= Pool Heater form_header= Stay warm and swim with a pool heater! What is your budget for a pool heater?*= _ [50] What type of pool do you have?*= () Salt Water () Chlorine What is the size of your pool?*= _ [50]
You do not have to turn the heater on until you are ready to heat the water, some installers put a tee or bypass before the heater so the water does not go thru the heater many do not since the heater is on the clean side of the filter, some people just want a bypass valve their in case the heater fails they can keep the water flowing around the heater, Take the cover off, start the filter up, start vacuumimg, when ready add your chemicals. continue running the filter get your water tested, when you feel you are about ready too swim turn the heater on too warm the water if you desire to.
no
A pool plumbing diagram with a heater typically includes pipes that connect the pool to the heater, a pump to circulate water, a filter to clean the water, and valves to control the flow of water. The heater is usually placed after the filter and before the return to the pool.
130000 btu
Do you mean a pool that has a salt water generator? If so, any pool heater could be used.
For my pool, I do the following: Pool Opening: Add water to above skimmer Open heater and connect heating port inside Reattach chlorinator and lines Connect heater at grey lines Remove skimmer plug Remove rubber plugs from jets Reattach black plugs to pump (2) and to filter (1) Reinstall filter cartridge Take a water sample to a pool store for a free water analysis
Hayward has a good electric heater. visit www.askpoolquestions.com for more information
Yes, the pool pump typically needs to be running when the pool heater is operating. This ensures proper water circulation, allowing the heater to efficiently warm the water and preventing overheating or damage to the heater. Additionally, running the pump helps distribute the heated water evenly throughout the pool. Always check the specific manufacturer's guidelines for your equipment for optimal operation.
Read the owners manual.
Try a pool shop