Instrument Cluster Removal & Installation 1. Disconnect the negative battery cable. 2. Remove the cluster opening trim panel. 3. On vehicles equipped with an automatic transmission, remove the loop on the indicator cable assembly from the retainer pin. Remove the thumbwheel bracket screw from the cable bracket and slide the bracket out of the slot in the steering column tube. 4. Remove the instrumental cluster retaining bolts. 5. Pull the instrumental cluster out of the instrument panel. 6. Detach the electrical connectors. 7. Remove the instrument cluster. To install; 8. The installation is the reverse of the removal. 9. Connect the battery cable, and check the operation of all gauges, lights and signals. *** Turn the light bulb housing counter clock wise. Sometimes they are very hard to turn. Don't be afraid to turn them. ***
the HEATER CORE can be removed by removing the dash. how do i ghange the dash
I take it to my mechanic and say, "it's broken. Can you fix it"?
Underneath the dash.
Well, this URL will help with what I think is the hardest part, the dash removal. http://www.scribd.com/doc/377317/Expedition
How to change dash lights on a 95 Ford Ranger?
You have a bad or missing ground.
Vehicle is in need of service...
Check owner's manual. If you don't have one copy and paste link below; www.fleet.ford.com/maintenance/owners_manuals
I believe it is under the dash on the drivers side
If tail lights and dash lights work - check bulbs
Fuse ( # 3 ) is a 25 amp fuse for the cigar lighter on a 1997 Ford Expedition ( located in the fuse ( junction ) box under the drivers side of the dash )
It is on the passenger side behind most of the dash. Most, if not all, the dash has to come out to acccess to it. It is a major job. Good luck.