It takes special equipment to "flash" a new computor. Your local auto parts store can send it out for this service.
1998 chevy malibu programe new switch
It may if the new ECU has been "flashed" with updated revisions but don't expect miracles.
yuo ned a scaner....or the diler a frehd traied end distroi the program.
To change the ECU in a Peugeot 307, first disconnect the battery to prevent electrical issues. Locate the ECU, usually found in the engine compartment or under the dashboard, and remove the necessary covers or panels. Disconnect the wiring harness and any attached components, then unbolt the ECU from its mounting. Replace it with the new unit, reconnect everything, and reattach the battery, ensuring to program or sync the new ECU if required.
The keys on the 1998 Ford Contour are NOT chipped
If you have chip keys, the dealer will need to program the keys to the new PCM.
Separate the tranny and engine...It's in there.
The ecu (or PCM) is the drivetrain computer. A flash update is just like a Windows or Mac program update. The manufacturer has altered the code and it has to be installed on the computer. The shop uses a bi-directional scan tool to load in the new software. They do the same thing when they install a rebuilt computer--they have to install the software. Car ECU progammer is used for reading and programming ECU content of eeprom file (or ROM memory with maps if eeprom physically not present). there have many different ecu modify * re-programming tools from vipprogrammer.com
Brand new they cost about 75,000 dollars depending on the package.
No or low fuel pressure
If you want to program a new PK3 Key, there is a procedure at the bottom of the linked page.Take Care,Greg
All new Chevy vehicles come with a 5yr/100k Mile Powertrain Ltd Warranty. You can read details on the Chevy warranty program at www.Chevrolet.com/Warranty.