Want this question answered?
Remove the tire and wheel from your 2004 Mercedes 240. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
remove bolts at both end of each slide rails, then slide everything to the rear about 1 inch, this will release the dogs for the vertical adjuster. now seat will come out, as you remove seat be sure to unplug seat belt warning
When you open the hood and are standing in front of the Rav4 the alternator is on the left hand front side of the engine. You will see a large pulley with the alternator belt on it to the left of the alternator.
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
How to replace front brake pads on Mercedes s430
how do i change front wheel bearing of kia sorento 2003
how do I get to the front bearing on a geo 4 wheel drive
how to replace front wheel bearing on 1996 Hyundai elentra
How do you change a 1998 jimmy 4X4 front wheel bearing ?
Engine? bad serpentine belt? bad bearing in a belt driven accessory i.e. alternator, a/c compressor. idler pulley? belt tensioner? etc. Drive train? front pads need replacement? bad wheel bearing? cv joint?
It is a sealed bearing and can not be repacked.
The alternator is located in the front lower left of the engine, if looking in from the front. Disconnect battery ground cable first. You need to remove the belt first. Use a 17mm socket and release tension on the belt tensioner to remove the belt. Then the alternator is held in by 2 external torx bolts. Remove these bolts and press the alternator out of the side of the engine. you will then need to remove the rear cable, and electrical connection. Also, the voltage regulators go bad on these cars way more then the whole alternator, so you might want to check on that first. Its attached to the rear of the alternator, and can be replaced seperatly.