There are two 6" screws on top of the headlight casing under the hood. Take them out, then slide the entire headlight assembly out towards the front of the car and disconnect the wires running to each individual bulb. Unscrew the bulbs from the back of the casing and VOILA! you have successfully taken out a headlight.
How do i remove the anti theft system on my 1995 Chrysler Cirrus?
Plastic headlight covers need to be buffed with rubbing compound used to restore paint
was wondering if someone can tell me how in detail to remove the tranny from my 1997 chrysler cirrus i need to replace the torque converter seal
Remove the instrument bezel.
Chrysler Cirrus was created in 1995.
You have to remove the fuel tank.
Remove left front wheel, remove inner fender well, remove battery.
You have to remove the upper intake manifold.
You take it off
there are 2 torx screws where the headlight housing is mounted to the radiator support. Remove these first. They are 4 to 5 inches long so they have to be pulled after unscrewing them. Remove the housing assembly. Then unplug the wiring, turn the light and remove it from the housing. Install in reverse order. Make sure the aligning stud is inserted into the fender.
You have to remove the upper intake manifold.
Remove battery ground for at least two minutes.