you may have a bad front wheel bearing hub assembly. 55 dollars for aftermarket. e z to replace. check brake fluid level too.
hubs
I am still waiting for the answer u cant reset the abs light u have to take it to the shop, if your abs light is on there is something wrong with your trac system
The ABS light is on because there is a problem with the system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself.
you cant bad speed senser in one of the wheel bearings is abs light on?
Disconnect the negative battery wire for about 15 minutes, then re-connect it. If your ABS is in working condition, it will reset.
To reset the abs light you need to check the system for failure codes, repair the cause, and reset with a scan tool.
The abs light is on because there ia a problem with the system. Once the problem is fixed the light will go off. As long as the light remains on the abs system is not functioning.
You can remove the ABS and brake light, from your Oldsmobile Alero, by removing the dash cover. The light retaining nut must be removed. The light will come out.
The abs light came on because there is a problem with the abs ( Anti-lock Brake System). The abs light will not reset until the problem has been fixed. Once the abs system is repaired the light will reset itself.
how to reset abs warning light on 2000 gmc Yukon
The ABS light is on because there is a problem with the ABS system. Once the problem is fixed the light will reset itself after a short drive. Your local auto parts store can retrieve the code(s) set in the ABS module to help direct you to the fault.
The ABS light on a 95 S10 Blazer has to be reset by a mechanic or the dealer. Unplugging the battery on the vehicle will not reset the ABS light.