you have to take the coil pack off and move it to the side thereis only a few bolts .Unhook front mounts real easy tilt engine ahead and there you go.
how do i change spark plugs on a 2000 hevy Monte Carlo
It is important to gap the spark plugs at the right size. The spark plug gap for a 1981 305 Monte Carlo is .045 inches.
The spark plug gap for a 1995 Monte Carlo z34 is.45 inches. New spark plugs come preset, however, and should not need adjustments prior to installation.
6. One for each cylinder. V6
Make sure it's getting gas and has spark to the plugs.
it could be because you have bad spark plugs or you may need a new fuel filter. most likely your spark plugs.
the spark plug gap for 2004 monte carlo ss 3.8eng is .060
Locate the coils. They are bolted to the ignition module mounting bracket. Unplug the wiring connectors to the module. Two bolts at the top and two nuts at the bottom should be removed, and then the bracket comes out with the module and coils still attached. You now have easy access to the rear spark plugs.
A tune-up can practically breath new life in a 2000 Monte Carlo. A basic tune-up requires replacing the spark plugs, fuel filter, and air filter.
Fuel pump, check pressure Coil, see if you are getting spark to plugs
The recommended spark plug gap for a 2000 Chevy Monte Carlo 3.4 V6 is .060"
the easiest way is to pull the upper plenium, of course you want to replace the gaskets at this time as well.