0
What else can I help you with?
What could you add to the circuit to control the bulb?
Switch
10 ohms 60 ohmsand 50 ohms are wired in series and connected to a 120-V battery What is the equivalent resistance for this circuit?
For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.
Can series circuits work when a switch is open?
No. Since the switch is in series with the circuit, opening it blocks the current flow through the circuit, turning it off.
How does removing bulb or opening and closing the switch affect a series circuit?
Removing a bulb - or opening the switch - breaks the flow of current in a series circuit.
An example series circuit might be what?
A voltage or current source in series with a circuit breaker or fuse in series with a switch in series with a light bulb.
What does a switch do to effect a series circuit?
For an electrical circuit to keep going, it cannot be interrupted. When the switch is adjusted, the electrical flow is interrupted. Move the switch again and the flow is restored. Without a switch a circuit is no longer considered a complete circuit. Simple fifth grade science.
Why are series circuit used for most control circuit?
Because The opening of any switch in a series circuit will open the circuit and stop the flow of current to the load
How does a house use a series circuit?
The most common form of a series circuit in a house is a circuit breaker (optionally in series with an on-off switch) in series with a load, usually a light bulb.
Is a switch in series with what it controls or in parallel?
An AC wall switch is in series within the parallel circuit of the overall house wiring.
What happens in a series circuit if the resistance is halved?
If you add a second resistor, the resistance of series circuit will increase.
When you add resistors that are in a series to a ciruit?
You raise the total resistance by that amount if added in series to a circuit. If you add them in parallel to a circuit then that total resistance will be less than the total of the added circuit.
Why it is often not practical to connect the electric components (example of lights) in series?
In a series circuit, if one of the light's filiments opens the bulb will go out, but along with that light every other device in the same circuit will stop operating.Think of an electric light circuit, in your home, that is controlled by a switch. When the switch is turned off the light goes out. This is an example of a series circuit where ithe switch is in series with the lamp.
