For an electrical circuit to keep going, it cannot be interrupted. When the switch is adjusted, the electrical flow is interrupted. Move the switch again and the flow is restored. Without a switch a circuit is no longer considered a complete circuit. Simple fifth grade science.
An AC wall switch is in series within the parallel circuit of the overall house wiring.
Yes, the placement of the switch does matter in a series circuit. Placing it before a component will interrupt the flow of current to the entire circuit, while placing it after a component will only interrupt the current to that specific component.
There is no current at all in the series circuit until the last component is in place, and the order in which they're arranged in the series circuit has no effect on the magnitude of current.
In a parallel circuit, there are multiple paths for electricity to flow. So, if one switch is turned off there is still other paths for electricity to flow so the other lights can remain on. However, in a series circuit there is only one path for the electricity to travel. So, if the switch in a series circuit was turned off the electricity would stop flowing causing all the lights to go out.
In a series circuit, the voltage is the same across all components connected in a series. This is known as the series circuit voltage.
usually in series
No. Since the switch is in series with the circuit, opening it blocks the current flow through the circuit, turning it off.
Removing a bulb - or opening the switch - breaks the flow of current in a series circuit.
A voltage or current source in series with a circuit breaker or fuse in series with a switch in series with a light bulb.
Because The opening of any switch in a series circuit will open the circuit and stop the flow of current to the load
The most common form of a series circuit in a house is a circuit breaker (optionally in series with an on-off switch) in series with a load, usually a light bulb.
An AC wall switch is in series within the parallel circuit of the overall house wiring.
a switch and a capacitor which is connected in series with the switch
In a series circuit, if one of the light's filiments opens the bulb will go out, but along with that light every other device in the same circuit will stop operating.Think of an electric light circuit, in your home, that is controlled by a switch. When the switch is turned off the light goes out. This is an example of a series circuit where ithe switch is in series with the lamp.
A light switch is in series with the light bulb it controls.
Any circuit that includes a switch (or other control - or measuring indicator) is a series circuit.
The on-off switch on your nightstand, which is connected in series with the lightbulb.