Best left to a trained gunsmith.
The second trigger is usually a "set" trigger, that spring loads the forward trigger and makes it into a hair draw trigger.
Rear trigger is "set" trigger, by pulling it 1st, it makes the main trigger a "hair" or lighter trigger
Type your answer here... how do I adjust the trigger on Remington 799
On some of the older rifles, they had a set trigger. You would pull it first to set the other trigger. The second trigger would be a hair trigger. It would have a very light pull. The first trigger was supposed to keep from accidentally firing the rifle as you were aquiring the target.
No, the Gyphon does not have an adjustable trigger
It is very easy to adjust the trigger on a Model 700 Remington. Remove the rifle from the stock and there is 3 small screws you can adjust. One is for the lbs. of trigger pull, which be careful you don't make it so easy it's a hair trigger and could go off just by the jar from closing the bolt. The other is to adjust the length of trigger pull.
If you are referring to a "SET Trigger" on a rifle. The Set Trigger releases all the normal mechanisms in the action but does not release the hammer on the rifle, but it sets up the firing trigger to act like a "Hair Trigger" just barley touch the firing trigger and the rifle goes off. It's used in hunting. It is common on black powder "Hawkins Rifles."
You will need to talk to a factory trained gunsmith
one trigger sets the gun to go off and the other fires it you must squeeze the first trigger then the second to fire the gun and if your not careful and pull the set trigger again instead of the second trigger the gun will not fire plus the second trigger being the fire trigger is usually a hair trigger meaning you barely have to pull it to make the gun fire
Yes, just simply buy a double trigger and double trigger guard, open up your marker, remove and replace the old trigger and trigger guard.
The only way is to replace the whole trigger but it will still have a hair trigger