0
How do you adjust clutch rod on a mtd 530 edger to tighten the belt?
Wiki User
∙ 16y ago
To do this, you need to remove the front pulley. Unscrew & slide the the bolt out of the front pulley. The front is made up of 2 halves spindle sheaves. You may need to remove also the front wheels to make room. When installing the new belt, you need to stand up the edger to rest the edger's front on the ground to compress the spring in order to have room to insert the new belt. Start from the engine pulley, wrap the belt onto the 2 idle pulleys. The "V" side needs to be onto the top idle pulley & the 'Flat' side needs to be onto the bottom idle pulley (this is important belt pattern). Then turn the belt 90 degrees counterwise from the bottom idle pulley & wrap the "V" side onto the front pulley. While the belt is onto the front pulley, insert back the bolt into the front pulley to install the front pulley. Put everything back together & that is it. Looks hard but really simple. The user manual is not clear on this. The belt MTD part number is 754-04032B. Hope this helps. Good luck. User manual on this site. http://manuals.mtdproducts.com/mtd/DocGetter?doc=769-00527h.pdf JoeJoe
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you adjust clutch belt on 89 Yamaha g2 golf cart?
you cant adjust a drive belt, you problem is in the secondary clutch, I am sure you need to replace the sliding clutch and put a spacer in front of the hub.
How do you tighten the air conditioning belt 1988 BMW xi?
Sepentine-replace tensioner,v-belt, adjust accessory and tighten.
How do you tighten a belt on a golf car?
There is no belt adjustment on a golf cart. However, if the belt is too loose, it may be a drive clutch problem, and an adjustment to the clutch can be made.
Tighten fan belt on a Renault master?
To tighten the fan belt on a Renault Master, a person needs to adjust the belt tension wheel. This wheel has a bolt that is inserted in a groove. The bolt can be loosened and then moved to the desired location to tighten the belt.
How do you change a belt on a Suzuki vinson?
you have to take the primary clutch off and start the belt on the secondary and use the sleeve on the primary to walk the belt on the primary shaft. Then reassemble the clutch and tighten down the nut. simple..
How do you adjust air con clutch on 1989 jeep Cherokee?
There is no adjust on an AC clutch, it is a good or bad situation. The clutch is activated magnetically. If it is th ebelt you are asking about it should be kept tight by the belt tensioner. If it is still squealing, change the belt, if no help change the tensioner.
Where is the AC tension pulley for a 2000 Chevy Metro?
you dont adjust a tension pulley you adjust the position of the compressor to tighten the belt
How do you adjust a new drive belt for a 1538 hydro Sabre lawn tractor?
Need to tighten the belt on john Deere 1538
Adjust a drive belt on a 1999 325 polaris trail boss?
the belt is adjusted by adding or removing shims in the secondary clutch. to tighten the belt you remove or use thinner shimms. not a hard job after you figure it out, but not easy if you've never done it. if you have never done it i suggest having someone who has help you the first time. there are also a few specialty tools you will need, puller and clutch compressor.
How do you tighten the alternator belt on a 240sx?
To tighten the alternator best on a 240sx, loosen the bolt on the alternator on the drivers side. Pull on the alternator away from the engine to adjust the belt. When it has no more than a quarter inch of give, tighten the bolt to finish.
How to Tighten the serpentine belt on a 5 series BMW?
These use an auto tensioner. The tensoiner (if in proper working condition), will adjust the belt by itself.
How do you adjust alternator belt tension on a 1995 Nissan Sentra XE?
You'll find an idler/tensioner pulley, which rides on an adjustable arm. First you have to loosen the locknut(14mm?) of the pulley , then tighten/loosen the adjuster rod (8mm?) to adjust the belt tension. Afterwards, tighten the locknut.
