Want this question answered?
http://neptune.spacebears.com/cars/stories/carb.html turn the 2 front idel screws till the idel drops then turn back 2/3 turns then adjust main idel screw to drop normal idel make sure its at normal running temp and all air filters are on this can drag idel thanks
the idle is controlled by the computer should be about 700 rpm's
Idel screw is on the side throttle body its a small. Allen head stud
Idel Ianchelevici died in 1994.
Idel Ianchelevici was born in 1909.
FC Idel Kazan ended in 1993.
FC Idel Kazan was created in 1992.
Idel-Ural State was created in 1917.
Idel Torriente was born on 1986-09-09.
All idel control valves are typically located at the Throttle Body it is usually a small adjusting screw/nut
It's my guess, and only a guess, that the idle jet is either plugged or the idle screw is turned in too tight. Judiously apply some carb cleaner and open the screw 3/4 of a turn. Once you get it running, play with the screw to smooth it out.
The simple answer to adjust the carb you have is to connect a vacuum gauge to a vacuum port on the intake manafold. Start the engine, let it warm to normal operating temp. adjust the fuel/air mixture screws. You are looking for the highest smoothest reading on the gauge. as you adjust you will want to turn the idel speed to a lower rpm. Anything further, you will need to take the carb to a pro. The smaller the carb the better the fuel mileage but performance will suffer. For a four barrel carb the smaller the primaries the better.