Want this question answered?
You can't adjust high beams and low beams separately. All you can do is loosen the head light and adjust the tilt, then tighten it.
The high beam is fixed and not independantly adjustable. The low beam and fog lamps are the only adjustable lamps.
Because there are two light bulbs and the low beam bulb is burned out
Phillips screwdriver from the front
Yes, the 2003 Hyundai Accent takes a dual-beam headlight lamp for low beam and high beam. See sources and related links below for bulb information.
There is a screw (phillips) located next to the lo-beam housing, to the left or the right depending on which side you're going to adjust. Turn to the left and the beam will pitch upwards and to the right it will pitch downwards. Have fun ;D.
YES.....
It simply turns and uplugs
change the bulb, the high and low are contained in one unit...
On a 2003 Ford Expedition : Left Hand ( drivers side ) low beam ( # 25 / 10 amp ) Both sides high beam ( # 35 / 20 amp ) ( also , # 23 is a 10 amp fuse for the right hand low beam )
You must remove the front bumper!
Passenger side or driver side? BClear. The low beam is built into the same bulb as the high beam. Just pull the bulb out from behind the housing under the hood and replace it. If the low beam doesnt work you have to replace the whole bulb. They're not very expensive.