Disconnect the negative battery cable, then remove the distributor cap. Rotate the motor with a 15/16 socket wrench by the big bolt in the middle of the crankshaft pulley until one of the distributor cam lobes is on the rubbing block on the points. That will have the points open. Loosen the two screws holding the points to the distributor and use a feeler blade of the appropriate thickness for your motor's point specs, and tighten the two screws holding the points. Nothing to it. I
A 66 Mustang regardless of engine doesn't have an ignition module from the factory. It uses breaker points inside of the distributor housing to directly control the ignition coil.
44 yrs old
i need to know how to do the adjustment on front windows of 1967 fast back mustang There are four points of adjustement for the door glass. Two are for the vent window, these two are used to adjust the vent window in or out and forward and back. There are two more for the door glass, these two adjust level and in or out. ::AverageJoeResto.com::
about 4 quarts
How am I supposed to know?!
With a hacksaw.
Yes they should be if not you would only need to modify it slightly.
no
yes if you want them replaced
if it is stock, it is self ajusting
There were no Mustangs until '67.
In those years..they used 10w40.