What do you mean adjust it? Its a switch, its either open or closed. ie, on or off.
The "switch" is open or closed but the "switch" has an adjustment on it, a lever to get the travel of the "open or closed switch" correct. Otherwise the brake lights stay on all the time. Can anyone "REALLY" answer the question, and not be a ?@#$%#@?
you have to take off the panel that is covering around the brake and then you will see the brake light switch on the front side of the brake you can just simply turn it left or right and that will adjust it
the brake light switch is on a bracket just above the brake pedal.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
The 1988 Ford brake light switch does not adjust, replace it with a new one.
The brake light switch on almost all vehicles is located behind the brake pedal lever.
You need to adjust your brake light switch. It should be located on the brake pedal. Unplug the switch and loosen the nuts to adjust the button closer to the brake pedal.
The brake light switch is on a bracket near the base of the steering column.
I should be just above the brake pedal where the shaft of the pedal pushes up against the switch. It should be easy to adjust or replace
Most brake light switches ratchet into position and self-adjust. To reset the adjustment, press the brake pedal part way down & pull the switch out toward the pedal until it clicks several times.
It is on a bracket next to the brake pedal.
On the bracket that the brake pedal pivots on.
Adjust or replace the brake light switch.